For Prompt, Friendly Service, Call: 888.818.0118 | E-mail: info@epiplastics.com
Extrutech Plastics, Inc. - Wall and Ceiling Liner Panel Manufacturer
Extrutech Plastics, Inc.
Plastic Products
Wall & Ceiling Panels & TrimsSuspended CeilingsPrehung Doors & Door PanelsDoor Jambs & Frame Sets Extrutech FORM SystemClean Rooms & Modular Rooms
Demountable Partition Walls
Sheds & Hunting BlindsDie ToolingTrimboard Moulding & Vacuum Tubing Wood Grain Extrusions

  Industry Listings
 
 NOvA Panel Project

Car Wash IndustryAgricultural BuildingFood Process IndustryCommercial & Residential ConstructionSwimming Pools Specialty Extrusions
        VIDEO  FILE
   
NOvA Project Backgroud

Extrutech FORM System Extrutech Wall Liner Panels  & Trim Options Extrutech Ceiling & Wall
     Panels Installation
Extrutech Horizontal &
Colored Stripe Installation

 Extrutech FORM System                                                                                             QUOTE REQUEST
Extrutech FORM is a "stay in place" concrete form for 6" poured concrete walls.
Each FORM panel is 6" thick by 24" wide, cut to the inch up to 20' long or pre-cut
to project specifications and shipped as a kit to your jobsite.
    

Extrutech Plastics, Inc. brings a bright new face to concrete form construction by combining standard concrete form methods with the easy-to-clean, sanitary surface that Extrutech panels have always provided. This versatile, builder -friendly system features a two-foot wide, six inch thick precut panel that snaps together and locks in place using a double-spline E-Locking System. Creates a structural wall system that is a time-saver for both contractor and client, resulting in a bright white, sanitary, easy-to-clean finished wall.

Recommended Uses:

For any area that requires easy-to-clean concrete structural
walls, such as:
 - Dairy Barns
 - Cheese Plants
 - Bottling Plants
- Milking Parlors
- Food Processing
- Cold Storage
- Car Washes
- Clean Rooms
- Laboratories
CLICK ON ITEMS BELOW
FOR MORE INFORMATION
 


US Patent # 8,677,713

 


  Frequently Asked Questions 
 -  Product Installation Instructions
 -  Product Sales Flyer
 - Product Video   -   

Extrutech FORM System features double-spline,
male/female interlocking joints and strong honeycomb interior
walls designed to provide maximum panel stability.

 
    PRODUCT SPECIFICATIONS
  PC624 - Extrutech FORM
 
Stay-in-place Concrete Wall System 
FORM PANEL
Literature 
FORM PANEL
Instructions
 
FORM PANEL
Specifications

FORM PANEL
USA E84 Test 
FORM PANEL
Warranty
FORM PANEL
 
BRACING Details
FORM PANEL
Cleaning 
     
         

 PRODUCT VIDEO    Click on Bottom Right Corner for Full Screen




Extrutech FORM
  Supports 6000 lb. Van
Click to Enlarge View



Extrutech FORM
 Close-Up view shows no extra support
  used to hold up the Van.

 
 

 

Photo Gallery:
 Click on Image to Enlarge View, Close Tab to return to page.
 Wall & Ceiling Panels -Extrutech FORM System
   Wall & Ceiling Panels - Extrutech FORM System-2
 Extrutech FORM -Side Walls
 Extrutech FORM - Robotic Room
Extrutech FORM - Robotic Room
 Extrutech FORM - Side Walls
 Extrutech FORM - Side Walls
         
   Extrutech FORM - Tunnel Area
Extrutech FORM System
  17Ft High  Side Wall
 Extrutech FORM System
17 Ft High Side Walls
 
 
 Advantages: 
 


  - Quick installation
  - Never needs paint
  - Fewer Seams - 2' foot wide panels
  - Custom cut panel kits to 20' foot

   - Snap together double spline, E-Locking System
  - Standard rebar reinforcing methods apply
  - Water and corrosion-proof
  - Cleans easily - low maintenance


 
  - Panels will not rust, rot, or flake
  - Resists mold, mildew, bacteria growth
  - Brightens the interior of any building
  - Available in a bright white, high gloss, hard surface
  - Low maintenance, easy-to-clean,
    with water/mild cleaner
  - Protective film on both sides keeps panels clean
    during construction
  Panel Options:
 
 
Extrutech FORM 
 FOAM Filled Insulated Panel
 Each panel 6" inches thick by 24" inches wide up to 20' long.

 
Extrutech FORM with 2" Insulated Panel
and Extrutech P2400 - 2' Foot wide Panel

 
Extrutech FORM can also be supplied filled with insulating foam that provides about an R-20. Insulated panels can be provided to lengths requested up to 20 feet long. Contact one of our sales people for more details and pricing of this option.

Extrutech FORM can also be insulated with 2" of insulated form
 board for R-14. Brick and stone masonary may be added to exterior,
     to enhance the buildings appearance.

 
 
 EXTERIOR OPTIONS AVAILABLE

EXTURTECH EXTERIOR THIN BRICK OPTIONS  
 Applied directory to surface of the panel with a large number of patterns, sizes, and colors avaliable in individual or panel sizes to cover large areas quickly.

     
                                   
    Edge View - With Ledger
       Color:  CHARMING
     Color:  CITY CREAM
 Top View - With Ledger
 StackEZE PDF
 
 
 
 The Extrutech FORM panels lock together with a overlapping joint and use a double spline "E-Locking System" that allows the panel to be joint together side by side, without having to lift one panel over the other or slide one panel down the edge of another.  
   

Extrutech FORM Corner Detail locked together
with the double spline E-Locking System.
Note: Two spline inserts are required at each joint.



  Two Extrutech FORM Panels shown with Rebar
Double Spline, Vacuum and Electrical Chase.



      Extrutech FORM Panels shown on standard footing
            with required rebar as per design requirments.

        Extrutech FORM Panels shown on standard footing
                    with horizontal and vertical bracing.

 



        Extrutech FORM System shown on standard footing
                    with required horizontal and vertical bracing.

        Extrutech FORM System shown on standard footing
                    with support bracing durning construction.

 

                                         Extrutech Plastics is continually working to develop new building products
                                                          to meet ever-changing needs of our customers.
                                                    Contact us with your requirements for your next project.
 
 

 

EXTRUTECH PLASTICS, INC.
Manufacturer of Plastic Wall and Ceiling Panels
5902 West Custer Street, Manitowoc, WI 54220
Ph 888-818-0118  Fax  920-684-4344
Email  info@epiplastics.com


     


Extrutech Plastics, Inc. Extrutech Plastics, Inc.
www.epiplastics.com | Site Map | Privacy Policy | Catalog Index
Site created by ThomasNet Web Solutio
Company Name - Your Tagline Goes Here